Home | Site Contents | Search | aluSelect | Partners |About aluMATTER | Help  
Click here to go to the top-level of the aluMATTER site blank spacer
aluMATTER > Materials Science & Engineering > Plastic Deformation
  
Click to go to the previous page in this section Page 11 / 14 Click to go to the next page in this section  
aluMATTER logo lower section  
Plastic Deformation
  1. Plastic Deformation of Crystals
  2. Crystallographic Slip by Dislocation Motion
  3. Slip Systems
  4. Stress Field around an Edge Dislocation
  5. Interaction between Two Dislocations
  6. Interaction between Many Dislocations
  7. Stress to Move a Dislocation
  8. Yield Stress
  9. Strain Hardening
  10. Strengthening
  11. Flow Strength During Hot Rolling
  12. Strain Hardening During Cold Rolling
  13. Dynamic Recovery
  14. Effect of Temperature
Select Language:
[DE] [EN] [FR] [NL] 
Language Availability...

Send Feedback to EAA

Leonardo da Vinci, Helsinki Award 2006, Design and execution: Gerold Fink, Austria. Click to open PDF document about this award

Leonardo Da Vinci Helsinki Award 2006

Leonardo da Vinci, Helsinki Award 2006, Design and execution: Gerold Fink, Austria. Click to open PDF document about this award

Bronze medal for an outstanding project promoting and supporting the LifeLong Learning EU policy. Award Berlin 2007

  
Flow Strength During Hot Rolling

During hot rolling very rapidly a flow stress (kf) saturation occurs due to a balance between strain hardening and recovery effects. This is dependent on the strain rate and temperature.

With (Zener-Hollomon-Parameter):

See Also

Authors/Contributors

  
Site developed in partnership between the European Aluminium Association and MATTER
© 2001-2009 MATTER, The University of Liverpool.
aluMATTER is part-funded by the Leonardo da Vinci programme of the EU.
Click here to open the European Aluminium Association home page Click here to open the MATTER home pageClick here to open the University of Liverpool home page